CasaScapes Adhesive is one of the strongest polyurethane adhesives on the market. It is especially formulated for bonding concrete, natural stones, blocks, bricks and pavers. CASASCAPES BLOCK BOND HIGH STRENGTH, LOW VOC is formulated to provide a permanent bond to the above materials if properly installed.

Formulated For

  • Low VOC regulations (Volatile Organic Compound).
  • Works at above freezing temperature(32°F / 0°C).
  • Retaining walls, masonry units, stones and bricks, concrete pavers.
  • Works on dry and damp surfaces.
  • Waterproof.
  • High strength and durability.


Provides approx. 30 linear feet of 1/4” bead.


See videos for visual installation. Always refer to the latest CasaScapes Adhesive
Technical Data Sheet (TDS) at before installation.

To ensure optimal adhesion, make sure that the concrete and stone surfaces are clean and free of any foreign matter. Drying times vary depending on factors such as humidity, porosity, temperature and materials bonded together.
Cut the spout and puncture a hole in the cartridge with a nail.
Using a caulking gun, apply CASASCAPES BLOCK BOND HIGH STRENGTH, LOW VOC on the clean surfaces.
Join the two surfaces firmly, use twisting motion.
Casa Scapes Adhesive is not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams.